Bootable image at @ ram:0x5344d6e0 Bootable image segment 0 address range [0x81100000, 0x81da5280] is in range [0x80180000, 0x90000000]. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ File "usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin" uncompressed and installed, entry point: 0x81895bf0 Loading Linux kernel with entry point 0x81895bf0 ... Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
Linux version 4.9.187 (xelinux@sjc-xelinux2) (gcc version 5.3.0 (GCC) ) #1 SMP Wed Dec 11 09:25:00 PST 2019 CVMSEG size: 2 cache lines (256 bytes) Cavium Inc. SDK-5.1.0 bootconsole [early0] enabled CPU0 revision is: 000d900a (Cavium Octeon II) Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. Aug 13 09:25:33.387: %BOOT-3-SYSD_STARTFAIL: R0/0: Failed to launch boot task boothelper_autoupgrade.service ( exit-code )
Both links down, not waiting for other switches Switch number is 2
Chassis 2 reloading, reason - Active/standby selection failed in 1+1 Mode reload fp action requested rp processes exit with reload switch code
watchdog: watchdog0: watchdog did not stop! reboot: Restarting system
Booting... The system is not configured to boot automatically. The following command will finish loading the operating system software:
please kindly advise how to can configure on Rommon on switch 3650
please kindly see in the attach file.
Best regards,
rommon ! > emergency-install usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin The bootflash will be erased during install operation, continue (y/n)?y Starting emergency recovery (usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin)... Reading full image into memory........................done Bundle Image -------------------------------------- Kernel Address : 0x537795d4 Kernel Size : 0x3faba9/4172713 Initramfs Address : 0x53b74180 Initramfs Size : 0xdf2d3b/14626107 Compression Format: .mzip
Bootable image at @ ram:0x537795d4 Bootable image segment 0 address range [0x81100000, 0x820a0000] is in range [0x80180000, 0x90000000]. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ File "sda9:cat3k_caa-recovery.bin" uncompressed and installed, entry point: 0x816733a0 Loading Linux kernel with entry point 0x816733a0 ... Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
Initiating Emergency Installation of bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin
Validating bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin... Installing bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin... Verifying bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin... Package cat3k_caa-guestshell.16.12.03a.SPA.pkg is Digitally Signed Package cat3k_caa-rpbase.16.12.03a.SPA.pkg is Digitally Signed Package cat3k_caa-rpcore.16.12.03a.SPA.pkg is Digitally Signed Package cat3k_caa-srdriver.16.12.03a.SPA.pkg is Digitally Signed Package cat3k_caa-webui.16.12.03a.SPA.pkg is Digitally Signed Preparing flash... Syncing device... Emergency Install successful... Rebooting Restarting system.
Booting...Up 10 Mbps Full duplex (port 0) (SGMII) Down (port 0) (SGMII)
The system is not configured to boot automatically. The following command will finish loading the operating system software:
boot
rommon ! > Up 1000 Mbps Full duplex (port 0) (SGMII)
rommon ! > boot
Getting rest of image Reading full image into memory...Check base package header ...: done = 16384 Getting rest of image Reading full image into memory....done Reading full base package into memory...: done = 32823196 Bundle Image -------------------------------------- Kernel Address : 0x5377b3c0 Kernel Size : 0x438410/4424720 Initramfs Address : 0x53bb37d0 Initramfs Size : 0x1abc7cc/28035020 Compression Format: mzip
Bootable image at @ ram:0x5377b3c0 Bootable image segment 0 address range [0x81100000, 0x81da5280] is in range [0x80180000, 0x90000000]. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 623 Loading Linux kernel with entry point 0x81895bf0 ... Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
Linux version 4.9.187 (xelinux@sjc-xelinux2) (gcc version 5.3.0 (GCC) ) #1 SMP Wed Dec 11 09:25:00 PST 2019 CVMSEG size: 2 cache lines (256 bytes) Cavium Inc. SDK-5.1.0 bootconsole [early0] enabled CPU0 revision is: 000d900a (Cavium Octeon II) Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. %IOSXEBOOT-ce3e6257432740b7a8f733bda404ab48-new_cksum: (rp/0): 4 %IOSXEBOOT-ce3e6257432740b7a8f733bda404ab48-saved_cksum: (rp/0): 4
Both links down, not waiting for other switches Switch number is 2
Chassis 2 reloading, reason - Active/standby selection failed in 1+1 Mode reload fp action requested rp processes exit with reload switch code
watchdog: watchdog0: watchdog did not stop! reboot: Restarting system
Booting...Up 10 Mbps Full duplex (port 0) (SGMII) Down (port 0) (SGMII)
The system is not configured to boot automatically. The following command will finish loading the operating system software:
boot
rommon ! > Up 1000 Mbps Full duplex (port 0) (SGMII)
=========================== may i ask about stack , currently i have 3650-TS-S and 3650-TS-L( man IOS lanbase and IPbase) can we connect stack together ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: