Meet the Authors Slides - Network Programmability with Joe Clarke
(Live event – Wednesday, May 21st, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Thursday 21st, May 2020 at 10hrs PDT
In this session, Pearson co-author and Distinguished Engineer Joe Clarke talks about how Network Programmability models with YANG improves and achieves better network scalability, replicability, and reliability by leveraging automation.
Joe Clarke is a Cisco Customer Experience engineer; Joe has contributed to development and adoption of many of Cisco's network management and automation products and technologies. He helps to support, enhance, and promote the embedded automation and programmability features, such as the Embedded Event Manager, Tcl, Python, NETCONF/RESTCONF, and YANG. Joe evangelizes these programmability and automation skills in order to build the next generation of network engineer. Joe is a top-rated speaker at Cisco's annual user conference, CiscoLive!, as well as certified as a Cisco Certified Internetworking Expert, Certified Java Programmer, VMware Certified Professional, and certified Cisco network programmability engineer. Joe provides network consulting and design support for the CiscoLive! and the Internet Engineering Task Force (IETF) conference network infrastructure deployments. He is a co-author of Network Programmability with YANG: The Structure of Network Automation with YANG, NETCONF, RESTCONF, and gNMI as well as a chapter co-author in the Springer publication, Network-Embedded Management and Applications: Understanding Programmable Networking Infrastructure; and he served as one of the technical editors for the Cisco Press books, Tcl Scripting for Cisco IOS and Programming and Automating Cisco Networks: A guide to network programmability and automation in the data center, campus, and WAN. He is an alumnus of the University of Miami and holds a Bachelor of Science degree in computer science).
Outside of Cisco, Joe is a member of the FreeBSD project, and the co-chair of the Ops Area Working Group at the IETF. Joe is a certified commercial pilot for single-engine airplanes with an instrument rating.
This event provides an opportunity to interact with the author in real time and learn more about him, his story, the story behind his publications, and how he became a renowned expert.
Hello everyone,there's something I can't really understand...I have a Cisco router 3845 using static nat to forward voice traffic to an internal PBX ( 192.168.1.2 )The public IP is 22.214.171.124 : ip nat inside source static tcp 192.168.1.2 506...
I am trying to get a packet capture on a physical port (or VLAN interface) on a Cat 9300 running version 16.6.6But it does not capture any traffic.I think I have the capture set up correctly.If I set it to use a different interface, it works.I can see the...
Hello all, I have installed a Cisco 9500 switch and a Firepower 2100 running ASA 9.8The issue I am facing its the I am trying to connect the switch and firewall via L2 sub interfacesare not coming up on ay port that I have configured sub interf...
I have a Cisco ISR 1111 with a public IP address. I have dozens of micro sites setup like this but it's got me stumped. Based on sanitized debug attached - you can see SSH SYN comes to the router, the router processes that and sends the reply traffic and ...