Meet the Authors Event - Network Programmability with Joe Clarke
(Live event – Wednesday, May 21st, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Thursday 21st, May 2020 at 10hrs PDT
In this session, Pearson co-author and Distinguished Engineer Joe Clarke talks about how Network Programmability models with YANG improves and achieves better network scalability, replicability, and reliability by leveraging automation.
Joe Clarke is a Cisco Customer Experience engineer; Joe has contributed to development and adoption of many of Cisco's network management and automation products and technologies. He helps to support, enhance, and promote the embedded automation and programmability features, such as the Embedded Event Manager, Tcl, Python, NETCONF/RESTCONF, and YANG. Joe evangelizes these programmability and automation skills in order to build the next generation of network engineer. Joe is a top-rated speaker at Cisco's annual user conference, CiscoLive!, as well as certified as a Cisco Certified Internetworking Expert, Certified Java Programmer, VMware Certified Professional, and certified Cisco network programmability engineer. Joe provides network consulting and design support for the CiscoLive! and the Internet Engineering Task Force (IETF) conference network infrastructure deployments. He is a co-author of Network Programmability with YANG: The Structure of Network Automation with YANG, NETCONF, RESTCONF, and gNMI as well as a chapter co-author in the Springer publication, Network-Embedded Management and Applications: Understanding Programmable Networking Infrastructure; and he served as one of the technical editors for the Cisco Press books, Tcl Scripting for Cisco IOS and Programming and Automating Cisco Networks: A guide to network programmability and automation in the data center, campus, and WAN. He is an alumnus of the University of Miami and holds a Bachelor of Science degree in computer science).
Outside of Cisco, Joe is a member of the FreeBSD project, and the co-chair of the Ops Area Working Group at the IETF. Joe is a certified commercial pilot for single-engine airplanes with an instrument rating.
This event provides an opportunity to interact with the author in real time and learn more about him, his story, the story behind his publications, and how he became a renowned expert.
Hi all,I found out that there is a limit of 200ms of RTT from DNAC to Edge. So, in the case of a branch where that I have a satellite hop, like a VSAT, it is not possible to configure SD-ACCESS for the LAN? I was thinking of using SD-WAN as transit, but t...
Can anybody tell me how to perform a modem power cycle on IOS XE 16.06? The "test cellular 0/2/0 modem-power-cycle " command doesn't appear to exist and I haven't found a command reference with a different command option.
A L3 switch is connected to two routers via 172.16.90.2 on R2 and 172.16.90.3 on R1. I'm seeing 100.127.1.0 via both .2 and .3. But for 100.126.1.0 network, I'm seeing the route only via 172.16.90.3 on eigrp as shown below. What w...
Hello Team, I have a network where i have to do RSPAN port configuration to monitor traffic. The network is very big so we are doing RSPAN from each location ( 25 switch altogether) and move it towards an aggregation switch and then from ...