(Live Webcast Thursday February 28, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event had place on Thursday 28th, February 2019 at 9hrs PDT
In this event, Hall of Fame Member Peter Paluch and Cisco Designated VIP David Peñaloza talk about Enhanced Interior Gateway Routing Protocol (EIGRP) fundamentals. The session seeks to clarify the status and fundamentals of the EIGRP protocol. In addition, the experts discuss the common steps used to troubleshoot operations and common issues with EIGRP.
Review of EIGRP fundamentals
Recent advances and features in EIGRP
Troubleshooting tips and tricks
Peter Palúch is a Customer Support Engineer in the EMEA High-Touch Support CX team with a focus on Data Center Switching technologies. In his free time he indulges in all technologies, particularly routing protocols, routed technologies, and MPLS-based services. Before Peter joined Cisco, he worked as a university professor and a Networking Academy instructor and instructor trainer. Peter is an author of the Cisco Press title “CCIE Routing & Switching v5.0 Official Certification Guide, Volume 1”. He holds a CCIE certification on R&S #23527.
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017, 2018 and 2019. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification.
good day. ISR 4351/K9 IOS 16.09.04 i need to make "ip nat inside source static" for range 5100-5200 tcp ports. i have find code, like next: ip access-list extended 190permit tcp host 192.168.0.10 range 5100 5200 any!route-map MAP_RST permit 10m...
I just bought myself a 7206VXR for my home lab. This is replacing a typical home router, but I'm curious about the NAT configuration Say the interface that connects to the ISP is x.x.x.xThe interface that connects to the house is 192.x.x.x ...
I'm using version 16.3.7 of the C3650.increase the logging buffer size to 16000 andIf you increase the logging buffer level to informational, the size goes back to 4096.Are there any setting criteria that I do not know?