switchace5b2#28-Oct-2011 12:30:36 %VSDP-W-VSDPMD5AUTHFAILED: VSDP message from 10.10.10.10 was dropped, authentication is failed: key-string is ; key-id is 1., aggregated (2) What's the solutionThank you
Hi all, I understand bandwidth in QOS is use to guarantee a minimum bandwidthI understand police in QOS is to set a limit to the maximum bandwidth.class test_out
police 1608000 50000 100000 conform-action set-dscp-transmit af31 exceed-action set-ds...
I have VRF name TEST tied with Tunnel interface and this Tunnel using for DMVPN .
I used OSPF in same VRF as route protocol
I add one commands under OSPF 1 VRF TEST
The command was ”redestrubution eigrp 123 subnet” To test someth...
I tried to contact Cisco DNA to internet in order to but my Cisco CCO on it and to make the update the application on it.
Which port should be using for that? And from where config that? It is from DNA itself ?
I try to put the prox by name a...
Recently we deployed Cisco DNA in the network, using Port 2 DNA GUI as manage everything.
The question is How to config Port 1 10G?
From IMC through MGMT port or from KVM through magle ?
Do we need IP address on it? If...