Webcast Layer 3 Multicast: Security and Best Practices
(Live Webcast Tuesday November 28, 2017 at 11 am Pacific/ 2 pm Eastern / 7 pm Paris)
In this event, you will learn more about Layer 3 multicast and the best practices to identify possible threats and take security measures. The session provides an overview of basic multicast, the best security practices for use of this technology, and recommendations for how to configure an auto rendezvous point (RP) and Bootstrap (BSR) in multicast protocols, with particular focus on RP distribution methods. This event includes a live demonstration of Layer 3 multicast technology.
Agenda • Introduction • Multicast basics • Auto RP, BSR (RP distribution methods) • Possible threats and security measures • Demonstration
Luis Espejel is the Telecommunications Manager of IENova, an Oil & Gas company. Currently he works with Cisco IOS® and Cisco IOS XE platforms, and NX to some extent. He has also worked as a Senior Engineer with the Routing Protocols team in Cisco’s Global Technical Assistance Center (TAC), as a Network and Telecommunications Manager for GM’s Mexico subsidiary, and in the Engineering Department for Axtel, a major Internet Service Provider. Luis holds an Electronics and Communication degree and postgraduate degrees, one in marketing and one in telecommunications. He has several certifications such as Google Power Search, ITIL foundations, Certified Ethical hacker, CCNA in DC, Cybersecurity Specialist, and a CCIE in R&S (#52804) among others.
David Ramirez is a Network Engineer at Astra Zenca pharmaceutical, where he works on IWAN implementation projects and LAN refresh and migrations to 10 Gig Fibre ring network. Previously he worked as a Support Engineer for Cisco’s TAC Routing Protocols team, as a Deployment Engineer of Value Added Services (Voicemail and Multimedia Messaging Services for Mobile Telephony), and as a Telecom Associate Engineer at Getronics where he provided routing and switching support to several customers in the US and UK. David holds a Bachelor’s Degree in Electronics and Communication Engineering and diverse certifications such as ITIL Foundations, Microsoft Certified Professional, Cisco CCNA, and Cisco CCIE R&S-written only.
We look forward to your participation. Please Share this event in your social channels.
Are you a Cisco customer or partner and have a technical question? Get answers before opening a TAC case by visiting the Cisco Support Community.
I'm a little confused so I have one host that is 10.10.0.100 on vlan 1 with an SVI of 10.10.0.1/16 and I'm trying to ping vlan 100 with ip address 192.168.70.150 and an SVI of 192.168.75.1/24. The way it's laid out is I have a layer 3 Cisco switch directl...
i have cisco c2960-48lps-L Switch. i downloaded new IOS to switch and tried to install via XMODEM after IOS file is copied Successfully to the flash. after boot my IOS file switch started automatically restart and iOS install again this is the last masseg...
Hi guys,Can someone tell me what is the difference between these two extended ACLs?1) permit udp any range 8801 8810 192.168.0.0 0.0.255.2552) permit udp any 192.168.0.0 0.0.255.255 range 8801 8810 Thank you!
Cisco Secure Network Access is helping IT to bridge the gap between what is essential to the business and what the network delivers and to build the next-generation campus network for an unplugged and uninterrupted experience.
Learn more about how these w...