Configure Register Equivalent CLIs in IOS-XE

Cisco Document Team · ‎03-30-2023

The Cisco Document Team has posted an article.

This document describes how to modify certain system parameters using CLI commands on Catalyst 9000 switches running Cisco® IOS-XE.

Know of something that needs documenting? Share a new document request to doc-ic-feedback@cisco.com

Your input helps! If you find an issue specific to a document, please let us know. Remember to provide as much detail as possible when submitting a request or feedback on an existing document including information regarding the section, area, or issue you had with the document and what could be improved.

You can provide feedback in a few ways:

Using the Feedback button located at the right panel of the corresponding article.
Submitting your feedback on an existing article or video, or new document request to doc-ic-feedback@cisco.com.
If you are opening a TAC (Technical Assistance Center) case, you can notify your engineer of the gap or missing content and they can create a request on your behalf.

See How Cisco TAC is transforming documentation and simplifying self-service in this blog

Rich R · ‎03-31-2023

It's either config register for short or configuration register but not configure register so suggest to update the subject of this post!