cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
768
Views
0
Helpful
0
Comments
Didier DRIEUX
Level 1
Level 1

Hi,

It's about a randomly problem on management interface between Nexus2248 and MDS9148. Sometimes, the connexion lost and after some time it goes back. But when you connect a PC there isn't problem. If you want to restore immediatly, it's necessary to reboot the nexus.

Have you seeing this problem ? On attachment the IOS version.

sh ver
Cisco Nexus Operating System (NX-OS) Software

TAC support:
http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by

other third parties and are used and distributed under license.

Some parts of this software are covered under the GNU Public

License. A copy of the license is available at

http://www.gnu.org/licenses/gpl.html
.

Software

  BIOS:      version 1.3.0

  loader:    version N/A

  kickstart: version 5.0(2)N1(1)

  system:    version 5.0(2)N1(1)

  power-seq: version v1.2

  BIOS compile time:       09/08/09

  kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.2.N1.1.bin

  kickstart compile time:  10/15/2010 0:00:00 [10/15/2010 10:00:43]

  system image file is:    bootflash:/n5000-uk9.5.0.2.N1.1.bin

  system compile time:     10/15/2010 0:00:00 [10/15/2010 11:34:05]



Hardware

  cisco Nexus5010 Chassis ("20x10GE/Supervisor")

  Intel(R) Celeron(R) M CPU    with 2073416 kB of memory.

  Processor Board ID JAF1434BHBG



Thanks

Best regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: