Hello,   Just a question what is exactly the "Emergency image Version"   Best regards ... View more

Hi, I am actually an authentication issue with AP 3802 with Flex 7500 running in 8.2.166 version.Has anyone encountered this type of problem ? Thanks   Best regards     ... View more

Hi, I would like to know with which IOS version of controler 5760 are recognized the AP 2702I ? In some documentations, It's specified that the WLC 5760 support the APS 2702I but in the release note of 03.03.5 SE or 3.6.0E (ED), I don't see any information about this type of APs. We have the test with the version 03.03.5 SE, we have error message the APs 2702I are not supported. Thanks Best regards ... View more

Hi, It's about a randomly problem on management interface between Nexus2248 and MDS9148. Sometimes, the connexion lost and after some time it goes back. But when you connect a PC there isn't problem. If you want to restore immediatly, it's necessary to reboot the nexus. Have you seeing this problem ? On attachment the IOS version. sh ver Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html . Software   BIOS:      version 1.3.0   loader:    version N/A   kickstart: version 5.0(2)N1(1)   system:    version 5.0(2)N1(1)   power-seq: version v1.2   BIOS compile time:       09/08/09   kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.2.N1.1.bin   kickstart compile time:  10/15/2010 0:00:00 [10/15/2010 10:00:43]   system image file is:    bootflash:/n5000-uk9.5.0.2.N1.1.bin   system compile time:     10/15/2010 0:00:00 [10/15/2010 11:34:05] Hardware   cisco Nexus5010 Chassis ("20x10GE/Supervisor")   Intel(R) Celeron(R) M CPU    with 2073416 kB of memory.   Processor Board ID JAF1434BHBG Thanks Best regards ... View more

Hi, The problem is between management interface Nexus 2248 and MDS9148, sometimes there is connection lost between this interfaces. To solve the problem immedialtly, it's necessary to put a PC or reboot Nexus2248. Then if you wait a moment the connexion back again. In attachment, the IOS version : sh ver Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html . Software   BIOS:      version 1.3.0   loader:    version N/A   kickstart: version 5.0(2)N1(1)   system:    version 5.0(2)N1(1)   power-seq: version v1.2   BIOS compile time:       09/08/09   kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.2.N1.1.bin   kickstart compile time:  10/15/2010 0:00:00 [10/15/2010 10:00:43]   system image file is:    bootflash:/n5000-uk9.5.0.2.N1.1.bin   system compile time:     10/15/2010 0:00:00 [10/15/2010 11:34:05] Hardware   cisco Nexus5010 Chassis ("20x10GE/Supervisor")   Intel(R) Celeron(R) M CPU    with 2073416 kB of memory.   Processor Board ID JAF1434BHBG Have you seeing this problem ? Thanks Regards ... View more

Hi, I have a problem with rule of FWSM. Message log : Aug   3 16:38:57 PIX-Part Aug 03 2010 16:38:57: %FWSM-3-106010: Deny > inbound tcp src filiales:10.113.248.17/4144 dst > dmzpub-part:146.249.250.133/21 > Aug   3 16:39:00 PIX-Part Aug 03 2010 16:39:00: %FWSM-3-106010: Deny > inbound tcp src filiales:10.113.248.17/4144 dst > dmzpub-part:146.249.250.133/21 > Aug   3 16:39:06 PIX-Part Aug 03 2010 16:39:06: %FWSM-3-106010: Deny > inbound tcp src filiales:10.113.248.17/4144 dst > dmzpub-part:146.249.250.133/21 The rule is : access-list filiales_access_in extended permit tcp 10.113.248.16 > 255.255.255.240 host 146.249.250.133 object-group S_FTP Yet the access-list capture match well the traffic: fw-tiers# sh access-list cap_MDA > access-list cap_MDA; 2 elements > access-list cap_MDA line 1 extended permit ip 10.113.248.16 > 255.255.255.240 host 146.249.250.133 (hitcnt=12) 0x2fe4c3b1 > access-list cap_MDA line 2 extended permit ip host 146.249.250.133 > 10.113.248.16 255.255.255.240 (hitcnt=0) 0x67ee5327 But not those that used to filter the traffic : sh access-list filiales_access_in | inc 10.113.248.16 access-list > filiales_access_in line 2 extended permit tcp > 10.113.248.16 255.255.255.240 host 146.249.250.133 object-group S_FTP > 0x7188a1ec access-list filiales_access_in line 2 extended permit tcp > 10.113.248.16 255.255.255.240 host 146.249.250.133 eq ftp (hitcnt=0) > 0xdc2693b4 > access-list filiales_access_in line 2 extended permit tcp > 10.113.248.16 255.255.255.240 host 146.249.250.133 eq ftp-data > (hitcnt=0) 0x33118715 We have tried to disable FTP inspection without succès. The version of FWSM is FWSM Firewall Version 4.0(5) Device Manager Version 6.1(3)F Thanks for your help Regards ... View more