AGENDA • Introduction to Cisco Prime LMS • Evolution of Cisco Prime LMS • Configuring and Implementing Cisco Prime LMS • Live Demo
During this live event, Vinod Arya explains the installation of Cisco Prime LMS, including initial portal login and use of the Getting Started workflow to configure the server.
Currently doing a bgp rpki topology and set up an ubuntu server with an rpki validator and everything is working. Now, trying to connect my bgp routers to the rpki validator. I enter router bgp <as number> Then Device(confi...
view more
As the title says, I have a 2921 with one EHWIC-D8ESG and one EHWIC-4ESG (plus one EHWIC-1GE-SFP-CU, which likely does not contribute to the problem). Both Gigabit multi-port EHWICs are connected to VLAN 10, configured as NAT inside. G0/1, G0/2 and G0/0/0...
view more
Need guidance to clear the difference between following end terms in following cisco switch models, C9200L-24P &&C9200L-24T &&C9200L-24PL &&C9200L-24PXG &&C9200-48PB Thanks
Hi,recently i saw this MSG. on the log file but i cant understand what is the cause route of it LC/0/0/CPU0:Feb 26 21:46:30.694 UTC: fib_mgr[184]: %ROUTING-FIB-4-RETRYDB_NONEMPTY : One or more FIB object(s) have been in IPv4 retry queue for at ...
view more