THREE PART SERIES This Deep-Dive series is focused on the advantages of Nexus 1000v Solution across spectrum of technologies and how it can be leveraged to enhance your Data Center Virtual Infrastructure to meet the next-generation goals.
Cisco Nexus 1000V Series Switches provide a comprehensive and extensible architectural platform for virtual machine (VM) and cloud networking. The switches are designed to accelerate server virtualization and multitenant cloud deployments in a secure and operationally transparent manner.
From single hypervisor to now a multi-hypervisor virtual networking solution, Cisco Nexus 1000v has come a long way since its launch few years back. Currently 1000v product-line provides complete solution ranging from Switching, Routing, Firewall, Load-balancing to Cloud-Infrastructure.
Vishal Mehta is a Technical Marketing Engineer with Cisco's Data Center Competitive Insights Team based in San Jose, California. Previously he was working as the customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013, Milan 2014, and San Francisco 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in Electrical and Computer Engineering and has CCIE® certification (# 37139) in Routing/Switching, Service Provider & Data Center
I am new to CML and i love it. I am beginner and looking for support. I want to know how to configure default gateway on PC (node) to access other network. I have been packet tracer user and it was simple there. On the other end where i can guide user man...
Hi, I am using this link below to do Network Throughput Calculator https://wintelguy.com/wanperf.pl One of the parameter is RTT. Could someone advise where do I get RTT? As I remember, it is the time between 1st packet...
what meas the follow erros log.Is an information message or is necesary to take an action? Mar 3 10:40:50 GMT: %IOSXE-3-PLATFORM: Switch 2 R0/0: /usr/sbin/boot_verify_package: File /ucode0/lost+found is a directory
Hello!I have DNAC version 188.8.131.52 and SD access fabric based on two C9300-48U switches: one border&control plane node, another - edge node.I create one VN network USERS with one IP network and try to configure routing with server out of fabric but hav...