Webcast video: Introduction to the Web of Things: What is it and why is it useful?
This event provides an overview of the Web of Things (WoT), from its definition and architecture, to its main components, scripting, and use cases samples. The WoT allows the integration of real-world objects not only to the Internet, but to the whole World Wide Web architecture. In this session the expert discuss the description of the architecture and main components of the WoT, which include the WoT Thing Description, the WoT Binding Templates, and the WoT Scripting API.
In addition, the expert share use cases and details about the open sources available for the WoT.
Ines Roblesis an Internet of Things (IoT) consultant with over a decade of experience as an IT researcher. She is the co-chair of ROLL WG, an IoT Member directorate, a member of routing directorate and a member of general area review at the IETF. Since 2014 she has been in Finland at the Aalto University to pursue a PhD related to IoT Group management. In 2007 she started as a researcher on network topics at the GridTICs laboratory UTN-FRM University in Mendoza, Argentina. She has experience with different protocols and programming.
Hi, I have replaced the cisco router 2921 with ISR4431 as HUB router in DMVPN, with spokes 124. Now all spokes fails to pass traffic to HUB router and all configurations are the same as Router 2921. Have any problem with ISR4431?
I have a new Firepower 1120 that is working today after some help from members of the community. I have found that all of my Windows systems running IPv4 have proper DNS records and can access URLs on the outside. But any device that is IPv6 d...
Hello, Here's a simple topology: I'd like to know which protocol or configuration I have to use to create my backup link considering that my routers are using OSPF. I only find solutions that use HSRP with two routers. Thanks.
Hi all,I have problem when I doing DMVPN lab.I configure the hub and spoke router.The spoke router is working. Use "sh dmvpn" can see output and can send NHRP Registration request to hub router.But "sh dmvpn" and "sh ip nhrp" show nothing on the hub route...
Looking for assistance on how to resolve this issue. Seems like one issue just lead to others. I configured this switch with a script I placed in the flash and everything worked out fine; my username/password was in there, encryption, configs,...