Cisco ios 1941 ios 15.8.3M9 support

[ozerilerri]

Hello, I am using a Cisco 1941 series router. I want to upgrade the version to fix the SSH vulnerability. It says that the problem has been fixed in the 15.8.3M9 version, but for this Ersiton, there is no version on the download center for the 1941 product, there is this version in different router series and the release notes also say that it supports 1941, for example, different products Is there any problem if I install the iOS version released for it?

The version I am currently using is 15.7.3M9, thank you.

 

 

[liviu.gheorghe]

Hello @ozerilerri ,

you can download the 15.8.3M9 version for the 1900 platform from here:

https://software.cisco.com/download/home/282774238/type/280805680/release/15.8.3M7

Hope this helps.

[ozerilerri]

Hello The link directs you to download M7, not 15.8.3M9 thanks

[liviu.gheorghe]

The 15.8.3M9 does not exist for the 1900 platform.

[balaji.bandi]

the model you mentioned 1900 and you looking IOS to download different model.(800 series)

as per screenshot its fixed on 15.8.3 (c1900-universalk9-mz.SPA.158-3.M7.bin)

https://software.cisco.com/download/home/282774238/type/280805680/release/15.8.3M7

[ozerilerri]

Hello,
I guess I couldn't explain it clearly, here's the thing: I'm actually using a 1941 serial router, my current iOS version is 15.7(3)M9, this version is "
Cisco IOS and IOS Can I use this version of the product for 1941? For example, as stated in the screenshots, this iOS version is available for a different device. It also says that it supports 1941 in the release notes. I am not sure about this.
Thanks.

[balaji.bandi]

since that is bug fixed - so you can use that version not a problem, Once cisco fix other issue next version it will be 5 star version.

as per screenshot its fixed on 15.8.3 (c1900-universalk9-mz.SPA.158-3.M7.bin)

[ozerilerri]

Hello,

15.8.3M7 still appears to be affected by the relevant vulnerability,

How did you see that this vulnerability was resolved?

Thanks.

[balaji.bandi]

as i was suggested on the before post mentioned based on your screenshot we have suggested, i have not looked the vul remediation.

check the PSIT for remediation depends on vul you looking to resolve.

[liviu.gheorghe]

I wouldn’t put an IOS image on the 1900 that is built for another platform.