Enabling SNMP on Fibre Channel Switches

[MattAtAJW]

We have a pair of MDS 9132T FC Switches and we are trying to find where to enable SNMP so that we can add monitoring of ports and system health to our PRTG Monitoring System.

Can anyone offer advice with regards to this?

Thanks in advance.

[balaji.bandi]

here is MDS switch config :

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/system-management/cisco_mds9000_system_management_config_guide_8x/configuring_snmp.html

[MattAtAJW]

Thanks @balaji.bandi 

Forgive my ignorance, but after reading through, I am still unsure of how or what to enable on my MDS switches to allow SNMP connections from our PRTG monitoring server.

I have from the Cisco Device Manager GUI, in the Admin -> Events -> Destinations, created both Addresses and Security entries for our PRTG Server however, this doesn't seem to work.

For example, one entry from the Security settings in Destinations :  194.100.0.203/161/0 | v2c | v2c | AJWSNMP | noAuthNoPriv

Am I missing something?