cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
232
Views
0
Helpful
3
Replies

I need a support in APs

mahmoudbarfi
Level 1
Level 1

Hi

I have an issue to setup APs in my office as it's only managed by mobile application and I need a full configuration management from portal

 

how could I login into access points via portal to change and configure it 

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

we hear you, but not much information here to guide you.

what AP ? what version of code ? ( we can not read your brian here, so kinldy provide as much information as you can to help people here)

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi Balaji

sorry for that, AP model is CBW240AC-I and I did standard configuration on it via Cisco business app 

agekov
Cisco Employee
Cisco Employee

   Hello Mahmoudbarfi, 
Hope you are doing well. 

If I understand you need access to web management of the CBW240 AP.
I can propose 2 approaches:

1. If you have access to DHCP server binding table in your network  you can check what IP address is assigned to MAC address 00:00:5e:00:01:01. Then you can put https://<IP address> in the web browser and you will be navigated to WEB GUI of the AP.

2. If you connect to WLAN through the AP and type https://ciscobusiness.cisco in the web browser.

Anton Gekov
Technical Consulting Engineer – Level 1
Global CX Centers – Small Business Support