01-18-2023 04:45 PM
Hello everyone, I have it a question for you. After update the router to the Version 15.7(3)M8, and power outage the router is requesting a Version 15.0(1r)M6. We had both ios on the memory but the router still shows this message (check below)
Any idea how I can fix it this concerns?
Thx
System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
Total memory size = 2048 MB - DIMM0 = 2048 MB, DIMM1 = 0 MB
CISCO2951/K9 platform with 2097152 Kbytes of main memory
Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled
Readonly ROMMON initialized
program load complete, entry point: 0x4000000, size: 0x18fa0
IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x4000000, size: 0x6dfd288
Self decompressing the image : ################################################# ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ########################### [OK]
*** No sreloc section
Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
HWIC Slot 0 0x00200000
HWIC Slot 2 0x00200000
PVDM 0 0x00200000
SM Slot 1 0x00600000
SM Slot 2 0x00600000
Onboard devices &
buffer pools 0x0230F000
-----------------------------------------------
TOTAL: 0x0350F000
Rounded IOMEM up to: 54MB.
Using 2 percent iomem. [54MB/2048MB]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.7(3)M8, REL EASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2021 by Cisco Systems, Inc.
Compiled Tue 02-Mar-21 04:07 by prod_rel_team
*** Machine Check Exception ***
CPU context of the most recent exception:
R0 = 0x046f359c R1 = 0x40c9a038 R2 = 0xf67c763e R3 = 0x00000000
R4 = 0x0c4d3a0c R5 = 0x0c4d3a0c R6 = 0x00000080 R7 = 0x00000080
R8 = 0x00000000 R9 = 0x00000001 R10 = 0x00000000 R11 = 0x11c40000
R12 = 0x42000048 R13 = 0xd8fecfd9 R14 = 0x05bad17c R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x00000001 R21 = 0x12e30000 R22 = 0x135eaba8 R23 = 0x135eaba8
R24 = 0x00000002 R25 = 0x00000000 R26 = 0x00000000 R27 = 0x00000000
R28 = 0x00000003 R29 = 0x00000000 R30 = 0xe4000050 R31 = 0xe4000050
CR = 0x42002048 LR = 0x0471c9a0 CTR = 0x046fd4dc XER = 0x20000000
TBU = 0x00000000 TBL = 0xdf9b81a9 DEAR = 0x00000000 IVPR = 0x00000000
PVR = 0x00000000 DBCR0 = 0x00000000 DBCR1 = 0x00000000 DBCR2 = 0x00000000
IAC1 = 0x00000000 IAC2 = 0x00000000 DAC1 = 0x00000000 DAC2 = 0x00000000
CSRR0 = 0x00000000 CSRR1 = 0x00000000 MCSRR0 = 0x0471c9a4 MCSRR1 = 0x02029200
PC = 0x0471c9a4 MSR = 0x02029200
CPU SPR Registers:
CSRR0 = 0x00000000
CSRR1 = 0x00000000
CTR = 0x00414e8c
DAC1 = 0x00000000
DAC2 = 0x00000000
DBCR0 = 0x41000000
DBCR1 = 0x00000000
DBCR2 = 0x00000000
DBSR = 0x00000000
DEAR = 0x00000000
DEC = 0x0000d895
ESR = 0x00000000
IAC1 = 0x00000000
IAC2 = 0x00000000
IVOR0 = 0x00000100
IVOR1 = 0x00000200
IVOR2 = 0x00000300
IVOR3 = 0x00000400
IVOR4 = 0x00000500
IVOR5 = 0x00000600
IVOR6 = 0x00000700
IVOR8 = 0x00000c00
IVOR10 = 0x00000900
IVOR11 = 0x00000b00
IVOR12 = 0x00000d00
IVOR13 = 0x00001400
IVOR14 = 0x00001300
IVOR15 = 0x00001500
IVPR = 0x00000000
LR = 0xff83f19c
PIR = 0x00000000
PVR = 0x80210030
SPRG0 = 0x0c1f14b8
SPRG1 = 0xffffffff
SPRG2 = 0x0c4d3a0c
SPRG3 = 0x13570000
SPRG4 = 0x0471c9a0
SPRG5 = 0x00000000
SPRG6 = 0x00000000
SPRG7 = 0x00000000
SRRO = 0x04026400
SRR1 = 0x02029200
TBL = 0xeb6dbb85
TBU = 0x00000000
TCR = 0x10400000
TSR = 0x08000000
USPRG0 = 0x00000000
XER = 0x20000000
BBEAR = 0x00000000
BBTAR = 0x00000000
BUCSR = 0x00000001
HID0 = 0x00004080
HID1 = 0xc3021000
IVOR32 = 0x00000f00
IVOR33 = 0x00001000
IVOR34 = 0x00001100
IVOR35 = 0x00001200
L1CFG0 = 0x00383820
L1CFG1 = 0x00383820
L1CSR0 = 0x00010001
L1CSR1 = 0x00000001
MAS0 = 0x100f0000
MAS1 = 0xc0000700
MAS2 = 0x03000006
MAS3 = 0x0300000f
MAS4 = 0x00000000
MAS6 = 0x00000000
MCAR = 0xe4000050
MCSR = 0x00010008
MCSRR0 = 0x0471c9a4
MCSRR1 = 0x02029200
MMUCFG = 0x000019c4
MMUCSR0 = 0x00000000
PID0 = 0x00000000
PID1 = 0x00000000
PID2 = 0x00000000
SPEFSCR = 0x00000000
SVR = 0x80e80011
TLB0CFG = 0x04110200
TLB1CFG = 0x101bc010
System Return Info:
count: 19, reason: bus error
pc:0x471c9a4, error address: 0x471c9a4
Stack Trace:
FP: 0x40c9a038, PC: 0x0471c9a4
FP: 0x40c9a048, PC: 0x046f359c
FP: 0x40c9a060, PC: 0x046f3c70
FP: 0x40c9a090, PC: 0x046f3e74
FP: 0x40c9a0f8, PC: 0x046fd5b0
FP: 0x40c9a118, PC: 0x0471477c
FP: 0x40c9a140, PC: 0x04716668
FP: 0x40c9a168, PC: 0x04724544
System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
Total memory size = 2048 MB - DIMM0 = 2048 MB, DIMM1 = 0 MB
CISCO2951/K9 platform with 2097152 Kbytes of main memory
Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled
Readonly ROMMON initialized
program load complete, entry point: 0x4000000, size: 0x18fa0
01-18-2023 05:06 PM
Version 15.0(1r)M6 - This ROMMON Version
Router booting correct IOS as below :
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.7(3)M8, REL EASE SOFTWARE (fc1)
program load complete, entry point: 0x4000000, size: 0x18fa0 < as per this message looks for me Router gone bad, required replacement.
01-18-2023 07:55 PM
01-19-2023 10:42 AM
buy refurbished you get cheap cost in the market.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide