05-04-2024 12:54 AM
help with this
05-04-2024 02:17 AM
@reesha hello, i have tested you path from R3 > PC1. remove static route 192.168.1.0/24 to serial0/1/1 in R3 and remove 192.168.1.0 static route in R1. then that path will start working. do the same finding on other paths and correct the routing.
05-04-2024 02:41 AM
hi, can i know why this static route 192.168.1.0/24 to serial0/1/1 in R3 should be removed?
05-04-2024 02:45 AM
@reesha Serial 0/1/1 is connected to another router. which have network 192.168.2.0. not the 192.168.1.0
05-04-2024 02:58 AM
are my ip routes on all the four routers correct? THE INSTRUCTIONS : Configure default static routing on R3 to establish communication to all networks on R4 and their remote networks using a directly connected interface. Configure static routing from R1 and R2 to access all remote network using next hop address. Configure default static on R4 to access PC networks using a directly connected interface. Verity the connections
05-04-2024 02:46 AM
hi, can i know why this static route 192.168.1.0/24 to serial0/1/1 in R3 should be removed? and how about the other pcs?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide