How to connect a SXGbic to a fibre nic (server)

[sirjohnbeano]

Hi,

Can I connect a SXGBIC (WS-G5484 or WS-G5486) to a fibre nic which is located into a server (win2008).

If its possible, what specifications must the NIC have.

Thanks in advance.

Beano

[Tom Randstrom]

As long as the two end points use the same protocols and transceiver specifications, you can interconnect them.  Make sure the server NIC is 1000Base-SX compatible (if using WS-G5484) or 1000Base-LX compatible (if using the WS-G5486). 

[sirjohnbeano]

Thanks Tom,

Can you help me what kind of protocols and specifications I have to look for ?

rgs,

Beano

[Tom Randstrom]

Do you have a link to information regarding the Server NIC?

[sirjohnbeano]

Hi,

I don't have one.

Example, I found a one HP Storageworks with Partnummer 250176-001 Is it possible to connect this ?

Specs

Speed = 2048 Mbps
64-bit PCI

Chipset Emulex FCA2101 (Emulex LightPulse Fibre Channel SCSI)

I can find which specs I have to look for.

Beano

[Tom Randstrom]

You need a NIC that supports Gigabit Ethernet, IEEE 802.3z standard, to interconnect with the Cisco Transceiver part numbers you outlined in your original posting.