03-10-2014 10:20 AM
Hi
We insert a SFP GLC-EX-SMD in a Module C3KX-NM-1G, in switch ws-3560X-48T, but appear a message " dont supported" and the port remains in error-disable. we probe in the four port of module C3KX-NM-1G.
In paper from webpage of Cisco, say that is supported this sfp GLC-EX-SMD, but we have to use other IOS 12.2.58.SE, but this ios not exist for these switch.
The switch have ios 12.2.55.SE5. we need this SFP for a distance over ten kilometer.
Link when appear data from switch 3560X, sfp and nm.
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html
My question is. is supported or need extra configuration for that SFP GLC-EX-SMD work in a Module C3KX-NM-1G, in switch ws-3560X-48T?
Regards
03-10-2014 03:18 PM
03-11-2014 05:49 AM
Hi leo
it is a switch 3560x 48T-E not a 3750X.
03-11-2014 02:54 PM
03-11-2014 05:51 AM
Hi
It is a switch WS-3560X-48T-E. the IOS 12.2.58.SE is not available for this switch.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide