3560 w/ SFP to AIR-PWRINJ-FIB to 1242AG issue

[LordRikiller]

Hi,

I'm having all sorts of issues trying to get an Acces Point talking to a switch.

I have the following:

• WS-C3560V2-24PS Catalyst 3560
  
• GLC-SX-MM= SFP Adapter
  
• AIR-PWRINJ-FIB Media Converter
  
• AIR-AP1242AG-N-K9 Access Point
  
• (MT-RJ to LC patch cable)
  

Here's what happens:

• The AP powers up via Ethernet
  
• The Ethernet LED is on for the AP (Status light is blue/green)
  
• The MC Shows both the Fibre and Power LED's
  
• The Switch does not show the Green LED where the SFP is plugged into
  

I've tried a few different configs with the switch and the Gigabit ports, but nothing I do seems to work.

Also tried other AP and MC.

Have confirmed that the AP works ok via Ethernet straight from the Switch.

And before you ask, yes, I do need to run the AP via the MC (due to distance).

I'd really appreciate any help on this one.

[ricardoglzs]

I have a very similar issue.

I have the following:

• WS-C3750G-12S
  
• AIR-PWRINJ-FIB Media Converter
  
• AIR-LAP1242AG-A-K9 Access Point
  
• (MT-RJ to LC patch cable)
  

Happend the same to me also.

The power injector recognize the link and the AP, but the switch in my case with a GBIC does not turn on.

Did you ever make it work?