Good day everyone,
Im still kind of new to networking out new structures so bare with me. Im trying to find a the best solution for proformance, reliablity, best pratice. With the current equipement.
What We have:
Switches:
2 - Cisco 3750 24P TS-S
1 - Cisco 3750 48P TS-S
2 - Cisco 2960 48P TC-L
Firewall:
Juniper SSG5
Servers:
HP ProLiant DL360e Gen8 8-SFF ( currently looking at as an Upgrade to switch to Virualition on Hyper-v)
HP ProLiant DL360 G5
HP ProLiant DL360 G5
HP ProLiant DL360 G5
HP ProLiant DL360 G5
HP ProLiant DL360 G5
We are Running 3 VLANS -
1 for LAN Access (Desktops, Laptops) Called VLAN 20
1 for 802.1q Trunk Wireless Access (Scanning systems.. basicly a wireless barcode scanner) Called VLAN 21
1 for VOIP ( Would like to upgrade to use POE, but not in the budget this year) Called VLAN 100
Between our 5 Switchs we have Fiber ran, that goes into a 10/100 Fiber Media Converter.
I guess my First Question is, why can't the fiber lines go directly right into Switch's SFP ports?
I have drawn our current network. Then drawn what I feel would produce a much better back bone and setup all around. Thoughts? Suggestions anything would be greatly appreiated.
CURRENT

Trying to be
