WAN hardening using ONS 15454

[anasubra_2]

Can anyone suggest any details about WAN hardening or any pointers. I guess, I would like to know about using ONS15454 to switch the DS3's between primary and secondary routers. By this we are trying to give redundancy for the customers channeslised T1 going through single DS3 get failed, it gets switched to another DS3 connected to another router.

Thanks

Regards

Anantha Subramanian Natarajan

[ssoberlik]

Manufacturer should indicate for which interfaces the equipment provides a protection card scheme (1+1 or 1+N), which protects the working cards against a hardware failure.

[anasubra_2]

Hi Thanks ...