AJ: ISDN Sample Config for T1/E1 connection

[ajarina]

I have no experience with ISDN configuration. Can anyone please help me configure this one or maybe point to a url closely related to what i have. I have 3640 on both ends with NM-HDV-2T. Our Telco is said to be using CSS with basic-5ess for its switch-type.

For both routers, i have also Controller-T1 for voice traffic. Below is the diagram for this one:

[Telco]---ISDN---[Router1]--PPP leased line--[Router2]---[PBX]

Thanks for the quick response.

[Chester Rieman]

Here is what you want do do on the PPP link:

http://cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094660.shtml

If your PBX is the same ISDN type, you can use TCCS:

http://cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800a96c1.shtml

Here is something close to your situation:

http://cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800fa11a.shtml

Hope this helps...