CAT6 E1 port (WS-X6608-E1) connecting to a Nortel PABX

[kim-yin_tay]

We have a requirement to connect a CAT6 E1 port to the Nortel PABX, the nortel model is Nortel Option 81C.

We will be configuring the CAT6 E1 port as a MGCP port. The Call Manager version we are using is 3.1(2c).

Could anybody advice me on the settings involved at both ends ? The Call Manager end and the PABX end. Is there any relevant url available ?

Rgds,

[thomas.chen]

I found this document which explains the settings on the Call manager side. Check with your PABX Vendor for the PABX settings.

http://www.cisco.com/warp/public/788/AVVID/ws_6608_t1e1_gtwy.html

[Niels Brunsgaard]

send me an email at nbrunsga@cisco.com and i'll send you some info