Cisco Media Streaming App (MOH) and Cisco MOH Device in RTMT question
I have been trying to figure it out what is the difference between these counters in RTMT.
I have taken a look at the description of the Alerts, and to me does not seems self explanatory also why use the "MOHStreamsActive" over "MOHUnicastResourceActive" or "MOHMulticastResourceActive". are those related? or they are the same?
1. Server --> Cisco Media Streaming App --> MOHStreamsActive
Object: Cisco Media Streaming App Counter: MOHStreamsActive Desc: This represents the total number of active (currently in use) simplex (one direction) streams for all connections. There is one output stream for each device listening to a unicast audio source and one input stream for each active audio source, multiplied by the number of MOH codecs. NOTE: Current behavior for this counter is such that when an audio source has been used once, it will always have one input stream for each configured MOH codec. For unicast streams, the stream may be in a suspended state where no audio data is received until a device connects to listen to the stream. Each MOH multicast resource uses one stream for each audio source and codec combination. For example, if you have configured the default audio source for multicast, G.711 mu-law and wideband codecs, then two streams are used (default audio source + G.711 mu-law and default audio source + wideband).
I just dont understand anything about this.
2. Server --> Cisco Media Streaming App --> MOHStreamsAvailable
Object: Cisco Media Streaming App Counter: MOHStreamsAvailable Desc: This represents the remaining number of streams allocated for the MOH device that are available for use. This counter starts as 408 plus the number of configured half-duplex unicast connections, and is reduced by 1 for each active stream started. The counter is reduced by 2 for each multicast audio source, multiplied by the number of MOH codecs configured. The counter is reduced by 1 for each unicast audio source, multiplied by the number of MOH codecs configured.
The part in red does not make sense.
3. Server --> Cisco MOH Device --> MOHUnicastResourceActive.
Object: Cisco MOH Device Counter: MOHUnicastResourceActive Instance: MOHServer1 Desc: This represents the number of active unicast MOH connections to this MOH server. Each MOH unicast resource uses one stream.
This is very clear to me.
Could you please help me to understand the following?
How the MOH counters on MOH Device and the Media Streaming APP are related?
Please help me to explain the #1 and #2.
If possible, please help me how to configure the 408 number, why it is 408?
Also which one I should use as authoritative source of information for actual MOH streams active.
Our beginner online classes are designed to help IT Admins plan, deploy, and manage their Webex Control Hub environment. Start off by learning what critical elements are needed to deploy Control Hub or move into Webex features that can be used to better ...
I need to modify the SIP header. When I call to the PSTN, the header SIP show From firstname.lastname@example.org (Gateway - Private IP 172.24.10.6) and i need email@example.com (Gateway - Public IP 184.108.40.206). How can I change in theGateway the ...
Need some help with a gadget development. Have a gadget built however it triggers when a call comes to an agent and immediately after when the agent goes into "RESERVED" state. I need to pop a window that is working however the pop happens bef...
Being a global business we require the ability to customise meeting templates for specific groups of users and not just have a single template globally, this is a branding requirement and is very important to us when dealing with clients. We also ne...