Destination pattern type issue

[mohammad saeed]

Hi guys,

I m fresh in VoIP and I found one CUBE connect with SIP and CUCM with this destination pattern:

dial-peer voice 9 voip
description **Outgoing Call to STC SIP Trunk**
destination-pattern 01[123456789].......
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:10.200.7.157
session transport udp
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte digit-drop
codec g711alaw
no vad
!

My question is 01[123456789]..... "I didn't find explanation for that way without comma or hyphen! what is it mean those number together [123456789] is it the same if i use it with commas [1,2,3,4,5,6,7,8,9]??

Thanks for all

Mohammad Saeed

[Patrick Sparkman]

[XXX] is the same as using a - hyphen.

Refer to Understanding and Troubleshooting Call Routing and Dial Pattern Problems with Cisco CallManager, there is an example in that document that has a similar pattern, where 1[23]XX will match 1200 through 1399 only.