H.450.X Supplementary Service support in CallManager

[anisha2202]

Hi all,

I want to know whether the call manager has support to H.450.X features. What will happen if a H.323EP supporting the H.450.X Hold, Transfer or Forward is used with the CallManager. WHether the call manager interprets those messages and acts as a GK or just routes the messages to appropriate destination ?

I dont have any idea about the Call Manager. But i have to verify how can/ will H.323EP used with CM.

Please guide me in this. Awaiting a positive response.

Thanks in Advance,

Anisha

[gogasca]

Hi Anisha,

CCM doesnt suppport H450, H.450 exist in IOS GWs.

CCM only supports ECS.

You may place an IPIP GW in the middle.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/intcmecm.html

[anisha2202]

thanks a lot. It really helped me to get some idea.

Hoping to get some more pointers too.

Thanks ,

Anisha

[LUCAS NEEDHAM]

Hi Anisha,

This is from the CME SRND, but has some good ECS/H450 info.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/intcmecm.html#wp1075557

Good luck