04-15-2004 11:43 AM - edited 03-13-2019 04:40 AM
Call Manager 3.3.3 has options for setting unique rings on multiple lines on the same phone. But when I go to select the ring settings for the other lines, I am only seeing 7 different ring types. I would like to be able to select from the main list of rings for each phone line on the phone. Is there a way to do this, or am I limited to the 7?
Solved! Go to Solution.
04-15-2004 01:27 PM
You will need to edit the DistinctiveRingList.xml file in c:\program files\cisco\tftpath. Make it the same as the RInglist.xml file if that is where you have made enteries for additional ringtones. If you are using the dfault rings then just copy and paste the contents from ringlist.xml into DistinctiveRingList.xml.
Then stop and restart the tftp service. It might take a bit due to the tftp path being cached.
Peter
04-15-2004 01:27 PM
You will need to edit the DistinctiveRingList.xml file in c:\program files\cisco\tftpath. Make it the same as the RInglist.xml file if that is where you have made enteries for additional ringtones. If you are using the dfault rings then just copy and paste the contents from ringlist.xml into DistinctiveRingList.xml.
Then stop and restart the tftp service. It might take a bit due to the tftp path being cached.
Peter
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide