monitor Active Ds0's via SNMP

[cklement]

I have a cisco WS-SVC-CMM Cat6k Voice Linecard and I would like to monitor the active DS0's per DS1 in MRTG. I've done a few searches and browsed the MIB tree and all the interesting parts of the MIB seem to not be implemented on this module. Cisco has been very inconsistent on which parts of the mib tree that they implement across their products. kind of sad really.

Can someone throw me a bone before I pester the TAC.

[sbilgi]

I have heard that there is no SNMP support for the card WS-SVC-CMM, Not sure though.

[cklement]

That is the story that I got from the TAC. there is _currently_ no support for SNMP on this card. Interestingly enough, some parts of the mib are populated, just not the useful ones.

The current work around that they are suggesting is to use perfmon on one of the callmanagers.

[ketpatel]

Here is a link that indicates no support for SNMP. Once at the page search for "snmp"..

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4847.htm

Regards,

ketan