QSIG

[ciscoforum]

When configuring QSIG on the MGCP, there is a field called connected PBX model, Meridian Option 11C is listed there. My PBX is Option61, is it ok? Currently it's Q931 between them and CCM is 333, we are going to upgrade it to 412 and use Qsig to support name display. Thanks

[wong34539]

Check the below link on how to set the - connected PBX model

- What if I have a different release of a PBX than what you have in the application note?

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_usage_guidelines09186a00803b2b0a.html#wp28194

You can use the configuration for the option 11c

http://www.cisco.com/application/pdf/en/us/guest/products/ps5453/c1072/ccmigration_09186a008032bdd2.pdf