10-08-2006 08:49 PM - edited 03-13-2019 03:16 PM
Is there a way to mask all outgoing call with the main number on a PRI with a DID block in SRST mode. example Phone 1's external phone number mask is Area code + 7 digit extension say 123 123 1001, extension 2 is 123 123 1002 so on. Main number of business is 123 123 1000, what would be the command/syntax to change the external phone number mask for all calls outbound in SRST mode to main number instead of individual DIDs.
10-08-2006 08:55 PM
Assuming you have dialplan pattern set, You can setup a translation rule on all outgoing dial-peers.
voice translation-rule 1
rule 1 /1231231.../ /1231231000/
voice translation-profile 1
translate calling 1
dial-peer voice 1 pots
destination-pattern 9T
port 1/0:23
translation-profile outgoing 1
HTH
sankar
PS: please remember to rate posts!
10-12-2006 07:08 AM
That worked! I was under the impression that there would be commands under the fall-back section, not realizing that standard translation would do the trick. Thx.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide