T1 CAS with ANI

[sperez]

Group,

I am trying to setup the following:

T1 that will receive and send ANI. When I use e&m-fgd, I can receive calls (when provider is setup to use MF), I can't send calls. I have a 3725 with a nm-hdv and t1 controller with the following command.

ds0-group 0 timeslots 1-24 type e&m-fgd

I have tried signal-class as well.

Can anyone help.

Steve

[gogasca]

For ds0-group type e&m-fgd we can receive ANI but not send it (feature group D).

For ds0-group type fgd-eana we can send ANI but not receive it.

Maybe what you could do is try to configure some timeslots for inbound calls (e&m-fgd) and some for outbound calls (fgd-eana), and build the dialplan accordingly.

It is possible to get ANI on CAS circuits using TCL scripts

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5207/products_configuration_guide_chapter09186a008020ecf6.html#wp1042209