cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
175
Views
0
Helpful
1
Replies

VoFr

russell.turner
Beginner
Beginner

I currently have two of my remote office configure for VoFR using a MC3810 connected to a Mitel PBX. For cost reason only I planned to set a up a Point to Point T1 connection to on of the branches eliminating the frame-relay connecton. I was working with a CCIE and he had mention I could trunk the calls to the PBX but he no longer able to help me cause he has left that company. Can anyone directed or give me some guidance how to proceed with this. If you need addtional info please feel free to e-mail me.

1 Reply 1

s.jankowski
Enthusiast
Enthusiast

The following two URLS have sample configuration for a T1 line terminating in a PBX and the backbone is a LAN environment , accordingly you can configure your own backbone. And the two examples have CAS and CCS for T1 line

VoIP with Common Channel Signaling (CCS)

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800fa11a.shtml

VoIP with Channel Associated Signaling (CAS)

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800fa115.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: