08-13-2012 03:34 PM - edited 03-15-2019 05:21 AM
Hi guys,
Does anyone has some examples of .ini configuration files?. I'm trying to push some configuration to a VXC 6215 via VXCM.
Also i need to override some old configurations that the thin client already has, is it possible?
Thanks
Christian Paz
Solved! Go to Solution.
08-14-2012 05:03 PM
Reboot the client, and while it's booting, keep the G key pressed. You should see a green Cisco login screen
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
08-13-2012 05:37 PM
As for the parameters:
http://www.cisco.com/en/US/docs/voice_ip_comm/vxc/english/vxc_6215_1-0/iniref/6215iniref.html
Once the client receives the new configs via a ini file the settings change accordingly, bear in mind that removing or not changing the same settings from the .ini file does not remove the old configurations unless you have preserve changes = no
ie
you had timezone in the .ini file with some value, if you remove the value from the .ini file, whatever you had before remains in the client config. Again, that unless you have preserve changes = no which basically means the client will get the config every single time it boots.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
08-14-2012 01:33 PM
Hi, do you know any procedure to go back to factory defaults (a hardware procedure), because i've been changing some parameters in the .ini files and now i can't access to the virtual desktops.
In vmware view the probles is that i can't use the mouse on the virtual desktop.
In citrix the browser crashes before displaying the desktop.
Thanks
08-14-2012 05:03 PM
Reboot the client, and while it's booting, keep the G key pressed. You should see a green Cisco login screen
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide