Hi everyone
I have a problem when replace a power supply (PWR-4000-DC) in Cisco 7613. We cannot see the power supply as below detail.
Every led is Green on hardware chassis.
Sep 14 17:41:38.317: %C6KPWR-SP-3-PSUNKNOWN: Unknown power supply in slot 1 (idprom read failed).
Sep 14 17:41:38.341: %OIR-SP-6-INSPS: Power supply inserted in slot 1
Sep 14 17:41:38.341: %C6KPWR-SP-2-PSFAIL: power supply 1 output failed.
Sep 14 17:41:38.341: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in power-redundancy mode, system is operating on one power supply.
Sep 14 18:05:50.615: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
Sep 14 18:05:50.635: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
xxxxx#sh env status power-supply 1
xxxxx#sh env status power-supply 2
power-supply 2:
power-supply 2 fan-fail: OK
power-supply 2 power-input: 3 DC active
power-supply 2 power-output-mode: high
power-supply 2 incompatible with fan: OK
power-supply 2 power-output-fail: OK
xxxxx#sh power status power-supply 1
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
xxxxx#sh power status power-supply 2
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
2 PWR-4000-DC 3806.46 90.63 OK OK on
