03-23-2015 08:33 PM - edited 03-01-2019 07:51 AM
Hi Everyone.
i have two Nexus devices, last week i upgraded from NXOS 6.03 to 6.1(5a), but when the device had done, i saw the CMP module no response status in on SUP.
Here is output in two devices. Everyone have any idea about it.
------------------------------------------------------------------
SB-CORE-NX7010-001# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 3.22.0
kickstart: version 6.1(5a)
system: version 6.1(5a)
BIOS compile time: 02/20/10
kickstart image file is: bootflash:///n7000-s1-kickstart.6.1.5a.bin
kickstart compile time: 12/25/2020 12:00:00 [10/06/2014 02:11:42]
system image file is: bootflash:///n7000-s1-dk9.6.1.5a.bin
system compile time: 10/3/2014 17:00:00 [10/06/2014 03:22:02]
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")
Intel(R) Xeon(R) CPU with 4104300 kB of memory.
Processor Board ID JAF1304AGAQ
Device name: SB-CORE-NX7010-001
bootflash: 2030616 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 1 day(s), 6 hour(s), 38 minute(s), 51 second(s)
Last reset
Reason: Unknown
System version: 6.1(5a)
Service:
plugin
Core Plugin, Ethernet Plugin
CMP (Module 5) ok
CMP Software
CMP BIOS version: 02.01.05
CMP Image version: 4.0(4) [build 4.0(4)]
CMP BIOS compile time: 7/13/2008 19:44:27
CMP Image compile time: 10/20/2008 12:00:00
CMP (Module 6) no response
SB-CORE-NX7010-001#
--------------------------------------------------------------------------------
SB-CORE-NX7010-002# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 3.22.0
kickstart: version 6.1(5a)
system: version 6.1(5a)
BIOS compile time: 02/20/10
kickstart image file is: bootflash:///n7000-s1-kickstart.6.1.5a.bin
kickstart compile time: 12/25/2020 12:00:00 [10/06/2014 02:11:42]
system image file is: bootflash:///n7000-s1-dk9.6.1.5a.bin
system compile time: 10/3/2014 17:00:00 [10/06/2014 03:22:02]
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")
Intel(R) Xeon(R) CPU with 4104300 kB of memory.
Processor Board ID JAF1306AMTC
Device name: SB-CORE-NX7010-002
bootflash: 2030616 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 1 day(s), 6 hour(s), 43 minute(s), 57 second(s)
Last reset at 566133 usecs after Sun Mar 22 03:39:09 2015
Reason: Reset triggered due to Switchover Request by User
System version: 6.1(5a)
Service:
plugin
Core Plugin, Ethernet Plugin
CMP (Module 5) ok
CMP Software
CMP BIOS version: 02.01.05
CMP Image version: 4.0(4) [build 4.0(4)]
CMP BIOS compile time: 7/13/2008 19:44:27
CMP Image compile time: 10/20/2008 12:00:00
CMP (Module 6) no response
SB-CORE-NX7010-002#
03-24-2015 11:20 AM
Hi,
I need understand that you need to make a upgrade to cmp? or do you did a upgrade of cmp?
03-24-2015 07:38 PM
Hi Ney
I upgraded the new IOS, and reload CMP alreadly had done. But i don't know why CMP no response.
do you have any idea about it?
03-25-2015 06:43 AM
did you upgrade CMP, because could be that with the new upgrade to nx-os not responde the CMP.
if you want you check verify that documentation in that link.
04-05-2015 08:40 PM
Hi Ney
we only upgraded new IOS with traditional method. After that, we reloaded cmp module.
we already done it with other devices, but this case we had problem.
Do you have any idea for it?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide