cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1554
Views
5
Helpful
2
Replies

Nexus 7K Upgrade issue

s.lachica
Beginner
Beginner

Anyone who can help explain and solve the issue below:

 

# show install all impact kickstart n7000-s1-kickstart-npe.6.1.4a.bin system n7000-s1-dk9-npe.6.1.4a.bin

 

Verifying image bootflash:/n7000-s1-kickstart-npe.6.1.4a.bin for boot variable "kickstart".

[####################] 100% -- SUCCESS

 

Verifying image bootflash:/n7000-s1-dk9-npe.6.1.4a.bin for boot variable "system".

[####################] 100% -- SUCCESS

 

Verifying image type.

[####################] 100% -- SUCCESS

 

Extracting "system" version from image bootflash:/n7000-s1-dk9-npe.6.1.4a.bin.

[####################] 100% -- SUCCESS

 

Extracting "kickstart" version from image bootflash:/n7000-s1-kickstart-npe.6.1.4a.bin.

[####################] 100% -- SUCCESS

 

Extracting "bios" version from image bootflash:/n7000-s1-dk9-npe.6.1.4a.bin.

[####################] 100% -- SUCCESS

 

Extracting "lc1n7k" version from image bootflash:/n7000-s1-dk9-npe.6.1.4a.bin.

[####################] 100% -- SUCCESS

 

Extracting "lc1n7k" version from image bootflash:/n7000-s1-dk9-npe.6.1.4a.bin.

[####################] 100% -- SUCCESS

 

Extracting "lc1n7k" version from image bootflash:/n7000-s1-dk9-npe.6.1.4a.bin.

[####################] 100% -- SUCCESS

 

Extracting "cmp" version from image bootflash:/n7000-s1-dk9-npe.6.1.4a.bin.

[####################] 100% -- SUCCESS

 

Extracting "cmp-bios" version from image bootflash:/n7000-s1-dk9-npe.6.1.4a.bin.

[####################] 100% -- SUCCESS

 

Performing module support checks.

[####################] 100% -- SUCCESS

 

Notifying services about system upgrade.

[#                   ]   0% -- FAIL.

Return code 0x40B30029 (Operation failed. Fabric is already locked).

 

Pre-upgrade check failed. Return code 0x40B30029 (Operation failed. Fabric is already locked).

CCIE (R&S) #27666 CCSI HP MASE
2 Replies 2

datamodule
Beginner
Beginner

check any one else is using your switch using the following command

switch(config)# show cfs lock

Check the output 

If you are happy no one is doing any changes

run the following command to clear

switch(config)# clear device-alias session

 

Worked great for me on a MD9148-32

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers