Hello all,
I have a N9272Q and want to downgrade the 40G ports to 10G using the SFP+ Adapter (QSA) Module.
Link is up/up on the other side of the connection but "notconnected"
Ethernet1/31
transceiver is present
type is QSFP-Cazadero
name is CISCO-DNI
part number is CAZADERO-R
revision is 03
serial number is DTY204601DN
nominal bitrate is 10000 MBit/sec per channel
cisco id is 13
cisco extended id number is 155
(config-if)# speed-group 10000
ERROR: Ethernet1/31: Configuration does not match the port capability.
(config-if)# speed 10000
Speed is 10G, but the port doesn't support this speed
My question is -- is this supported configuration or breakout cabling is the only option to go?
Many thanks,
-vmrv.