2621 & MLPPP

[pointer434]

I have a Cisco 2621 with IOS version Version 12.2(17a) and need to know if it supports MLPPP. Is there a command that will display the protocols that are valid with this model and version? Or does someone know off hand?

Thanks

Gary

[ahbanks]

Software Advisor is available from: http://www.cisco.com/kobayashi/support/tac/tools.shtml

You can enter the image name, like c2600-is-mz.122.17a.bin, from a "show flash" command, and this tool will show features and recommend upgrades.

Looking through the feature tools, is this a 2621 or 2621 XM?

It looks like the latest code is 12.3T or 12.3XD that will support MLPPP.

I made up an image name, c2600-is-mz.12.2-17a, (IP Plus feature set) which listed MLPPP as a feature. Check your exact image name, since you may have another feature set, which may or may not include MLPPP.

[pointer434]

I am pretty sure that it is just a 2621.

Here is an copy of the output showing the version.

Thanks, I will take a look at that software advisor.

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Thu 19-Jun-03 16:35 by pwade

Image text-base: 0x8000808C, data-base: 0x80A14C38

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

ystem image file is "flash:c2600-i-mz.122-17a.bin"

cisco 2621 (MPC860) processor (revision 0x102) with 59392K/6144K bytes of memory

Any other help is apreciated.

Thanks again.

gary

.