2950 switch: "show access-list" command does not display hit counts??

[jdw28]

The command displays hit count for standard list 13, but not for extended list BoxOffice. I verified that the switch is filtering traffic on appplied port, yet no ACL hit count for that port. The switch is running 12.1(9)EA1 enhanced image. Any thoughts?

NYPhil-1-2950-a#show access-lists

Standard IP access list 13

permit 10.10.0.0, wildcard bits 0.0.255.255 (32 matches)

Extended IP access list BoxOffice

permit tcp any host 192.168.168.10 eq www

permit tcp any host 192.168.168.10 eq 443

deny ip any any

[umedryk]

The access list is probably programmed into the TCAM hardware.