Other Network Architecture Subjects

Hi everyone. I am using HPOV NNM to monitor traffic loads on our 7206VXR. Strange thing is every second poll returns a zero value for Octets transmitted on an ATM subinterface. THis occurs when viewing real-time collectioin or even if I "walk the MIB...

Hi,out branch office have a NT server handing out IP addresses to the local PC's. We also got 2600 at those sites with NM-8AM cards. When users dial into the router, I would like to hand out IP addresses to them. Hence I created a DHCP pool called di...

I have a 678 DSL modem/router, and on occasion, usually when the DSL phone line is disconnected, I get a lot of network traffic from the 678 on the local ethernet. The traffic is on udp port 2066, and I have no idea what it is. Does anyone know what ...

The following is Cisco's explanation, but what type of discard errors would cause this field to increase or I don't need to be concerned?? (BAd NIC Card, Cable Etc.)The number of outbound packets which were chosen tobe discarded even though no errors...

Hi,I have two routers (3745 & 3600) which are connected via two 2M leased lines with mppp enabled.My intention is to enable LLQ on the virtual template (to prioritise voice traffic) but I am unsure whether to enable the "fair-queue" command on the in...

What would cause a BGP session to go Idle?Given a standard config if you had a situation where u had BGP peers constantly going into IDLE state.What would ordinarily cause this?I just want to understand what would cause this because I cant find an an...

All,This may seem inappropriate but my butt is on the line, so please read on.I have 2 developers who have domain admin rights in a windows 2000 environment. I discovered on Friday that these 2 have been creating a VPN tunnel to another companies ne...

Hi,Is there any option to find the contents of a packet passing across a router.Data type and data portion in the packet.I meant any option in Cisco IOS.Thanks.

Can any body please tell me a good Cisco Network Managment software which is avaliable free or atleast evaluation version on the internet.Thanks.

I have an as5800 server with a backup. The back up also has an oc3. Due to telco issues, I'm not allowed to route a different 800# to this backup os3. I need to do real testing . I'm not allowed to touch the existing and production server or oc3.I w...

Setting up a new branch office that is to have integrated T1 to the internet, and a Point to Point T1 to the main office. The PtP will carry data between the two PBX switches, and data from workstations to the server at the main office. I'm presuming...

Need assistance in setting up 1 virtual to two real...it will sit in a DMZ

The command displays hit count for standard list 13, but not for extended list BoxOffice. I verified that the switch is filtering traffic on appplied port, yet no ACL hit count for that port. The switch is running 12.1(9)EA1 enhanced image. Any th...