29xx/MSFC DRAM Install Instructions

[jkimbell]

I am looking for intructions to install DRAM in:

2924, 2948, 2980, and on both MSFC1 & MSFC2 in 65xx chassis on supervior cards.

Although this seems like an obvious thing to find notes about, I have not been able to search out any after lots of trying.

Any pointers, please?

[mhussein · Accepted solution]

2900XL/2948G/2980 series, memory can not be upgraded (or at least there is no memory or flash requirments for IOS/CatOS on these platforms).

For the 6500, the docs are under Technical Documentation/Module Installation Guides.

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_module_installation_guide09186a00801c5e15.html

Regards

Mustafa

[jkimbell]

First, thank you very much for your prompt response.

Second, do I understand that increasing the memory on the sup card increases the memeory for the MSFC? In other words, the MSFC uses the memory on the sup card? I thought the MSFC had its own memory, separate from the sup card memory.

Thanks again for you kind assistance.