02-23-2005 11:36 AM - edited 03-02-2019 09:50 PM
I am looking for intructions to install DRAM in:
2924, 2948, 2980, and on both MSFC1 & MSFC2 in 65xx chassis on supervior cards.
Although this seems like an obvious thing to find notes about, I have not been able to search out any after lots of trying.
Any pointers, please?
Solved! Go to Solution.
02-23-2005 04:49 PM
2900XL/2948G/2980 series, memory can not be upgraded (or at least there is no memory or flash requirments for IOS/CatOS on these platforms).
For the 6500, the docs are under Technical Documentation/Module Installation Guides.
Regards
Mustafa
02-23-2005 04:49 PM
2900XL/2948G/2980 series, memory can not be upgraded (or at least there is no memory or flash requirments for IOS/CatOS on these platforms).
For the 6500, the docs are under Technical Documentation/Module Installation Guides.
Regards
Mustafa
02-24-2005 12:18 PM
First, thank you very much for your prompt response.
Second, do I understand that increasing the memory on the sup card increases the memeory for the MSFC? In other words, the MSFC uses the memory on the sup card? I thought the MSFC had its own memory, separate from the sup card memory.
Thanks again for you kind assistance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide