06-28-2005 08:26 PM - edited 03-02-2019 11:14 PM
I noticed when I show run for WS-C3750G-24TS-E, it shows 3/0/x for the ports, not 1/0/x, This is a standalone switch now. But it was used in the lab stacked with the other switches.( I think maybe when they remove it from the stack it was not powered down before disconnect). Anyway now I want to recover it to the default configration. I even erased the config, but still same. I noticed there is a global command:switch 3 provision.. I tried to remove it by "no" but it says "DBI" can't be removed while it is active. How can I make the show running looks like inter giga 1/0/x not 3/1/x any more?
06-28-2005 10:51 PM
In global config, try "switch 3 renumber 1". save the config and reload the switch and you should have the ports as 1/0/x.
Please see below for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225sea/3750scg/swstack.htm#wp1112897
(URL may have word wraps)
06-30-2005 01:32 PM
Thanks. It works. Great
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide