01-21-2006 07:09 AM - edited 03-03-2019 01:31 AM
Hi,
recently i have upgarded the IOS on cisco 3750, IOS ver.12.1(14r)EA1a, earlier i was using the older one which has come along with the switch, now after upgrading the IOS, i am not getting any SNMP traps from the switch. i have a network monitoring software installed, which receivez the SNMP traps from the switches, now only from 3750 it is not able to receive the traps,other switches 3550 & 2950 where able to receive, even in these switches i have upgraded the IOS, but this works fine. what could be the reason?
01-21-2006 10:57 AM
Hello Anand,
there are numerous SNMP-related bugs in your IOS release. Can you post the configuration of your switch ?
Regards,
GP
01-21-2006 11:17 AM
Hello Anand,
in order to see which MIBs are loaded on your current IOS, you can also check with the command:
show subsys | include mib
to verify that you are polling data from existing MIBs.
Regards,
GP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide