10-14-2004 06:49 AM - edited 03-02-2019 07:16 PM
I'm curently running a 5500 with Supervisor IIIG and RSFC
this is running in Hybrid mode, Catos 6.3(7) and IOS RSFC Software (C5RSFC-I-M), Version 12.0(9)W5(17)
The other day I lost network conectivity between switch module and router module, the 5500 don't route and from the switch module is impossible entry router module, i try with telnet and session 15. the router module console work fine.
Looking the show Thech I noticed the following:
****************** show module ******************
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor IIIG WS-X5550 no ok
15 1 1 Route Switch Feature Card WS-F5541 no ok
2 2 2 1000BaseX Supervisor IIIG WS-X5550 no standby
3 3 2 SM OC-3 Dual-Phy ATM WS-X5157 no ok
4 4 24 10/100BaseTX Ethernet WS-X5234 no ok
5 5 24 10/100BaseTX Ethernet WS-X5234 no ok
6 6 24 10/100BaseTX Ethernet WS-X5234 no ok
7 7 24 10/100BaseTX Ethernet WS-X5234 no ok
****************** show trunk ******************
* - indicates vtp domain mismatch
Port Mode Encapsulation Status Native vlan
-------- ----------- ------------- ------------ -----------
1/1 on dot1q trunking 489
1/2 on dot1q trunking 489
3/1-2 on lane trunking 1
4/6 on dot1q trunking 422
4/10 on isl trunking* 201
4/12 on isl trunking 492
5/2 on dot1q trunking* 1
5/7 on dot1q trunking 301
5/13 on dot1q trunking 1
5/19 on dot1q trunking 334
5/20 on dot1q trunking* 1
15/1 nonegotiate isl trunking 1
I try with reset the router module and OIR, but i don't have change.
One new supervisor IIIG was installed and the problem conclude.
My question is has anyone ever seen this behaviour and if so what could be causing it?
10-20-2004 11:38 AM
Chances are that the Sup module might have been faulty. Did you see any error message? If so you could check bug CSCdv53084.
10-20-2004 06:16 PM
hi didyap
none error was found, the lack of communication is very rare.
thk.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide