10-22-2002 12:17 PM - edited 03-02-2019 02:17 AM
we have a site with a 64k circuit connecting to our wan with a 2524
we will upgrade the circuit to a t1 that will talk frame relay
i have a dead 2524 with a good t1 module
would like pull the 64k module out of the site's 2524 and stick the spare t1 module in
assuming that is possible, what will need to be changed on router config?
mtia
Solved! Go to Solution.
10-22-2002 12:55 PM
Should be an easy do for you. Here's the link for configuring the T1 module once you get it installed. http://www.cisco.com/en/US/products/hw/routers/ps233/products_installation_and_configuration_guide_chapter09186a008007e413.html#xtocid1660712
Bob
10-22-2002 12:55 PM
Should be an easy do for you. Here's the link for configuring the T1 module once you get it installed. http://www.cisco.com/en/US/products/hw/routers/ps233/products_installation_and_configuration_guide_chapter09186a008007e413.html#xtocid1660712
Bob
10-22-2002 01:21 PM
i should pay you $50 for that link.. THANKS!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide