6500 Series Feature Manager & ACLs: showing VMR details.

[mdoldan]

Cat 6513 SUP2,MSFC2,PFC2:

Im' running in Hybrid Mode (CatOS) and have a rather elaborate policy routed environment (no routing protocol enabled). I need to see how the ACL's are converted and stored as VMRs in the switch. From the MSFC I can see the active hardware using the show fm summary. From the switch I use the show security acl resource-usage.

P.S. I've already read the following:

http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_white_paper09186a00800c9470.shtml

Thanks for your help.

[sbilgi · Accepted solution]

From the MSFC, the command show fm int < interface type> will give you more interface specific VMR details. But, not very sure about the equivalent switch command.