6509 Native IOS 12.2(17a)SX4 Sample config

[mcpaytas]

I have a spare 6509 that I need to setup. I am used to working in the CatOS and the native IOS is throwing me for a loop. Does anyone have any sample configs showing inter vlan routing, vlan's, STP, and any other basic config ideas. I appreciate the help, thanks!

[Georg Pauwen]

Hello,

you might want to check this link, it has many sample configurations, a.o. for the 6500 IOS switch. You need a CCO login to access the page, though:

TECHNICAL SUPPORT

Catalyst 6500 Series Switches

Software Samples and Tips

http://www.cisco.com/cgi-bin/Support/browse/psp_view.pl?p=Hardware:Catalyst_6500_Series_Switches&s=Software_Configuration#Software_Samples_and_Tips

Since you said that you are familiar with the CatOS, it might be worth mentioning that there is a CatOS to IOS conversion tool available on CCO, here is the link:

Catalyst OS to Cisco IOS Configuration Converter

http://www.cisco.com/cgi-bin/Support/CatCfgConversion/catcfg_xlat.pl

HTH,

GP

www.solutionfinders.nl

[mcpaytas]

I appreciate the reply. I found this guide:

Configuring InterVLAN Routing Using an Internal Router (Layer 3 Card) on Catalyst 5500/5000 and 6500/6000 Switches That Run CatOS System Software

But I need one that shows how to do it on the Native IOS.

Also, can you setup routing using just the default vlan1?