7507 Error while Copy tftp to Disk0:

[mdavar]

Hi,

When I do

copy tftp:filename disk1:filename

It starts showing CCCCCCC......

The moment it shows 99% on the TFTP server, it shows the follwoing error message on the Router

ATA_Status timeout waiting for data transfer ready.

%Error writing disk1:/filename (TF I/O failed in data-in phase)

Could anyone suggest Solutions.

Thanks in Advance.

[p.krane]

The CCC denotes that the checksum is being verified, the problem could be that the IOS image you are using could be corrupted.

try using another file.

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/frus/12208r4b.htm#xtocid1552320

[mdavar]

Thanks for your response. As you said that the IOS image could be corrupted, but I am using the same image for booting also.

I tried copy the image from disk0 to slavedisk0. If it is corrupt then my router should also misbehave as the same image is in use. But I am not getting any sort of problems, except copying the image to slavedisk0.

Am I thinking in the right direction ?